Brian Cole II RAS

Brian Cole II is a prospect in the 2020 NFL Draft. All metrics that have been recorded are unofficial if the metric is highlighted in yellow. Once the NFL Draft has concluded, player scores will be finalized and the prospect card will be replaced with an official card.

This player did not record a RAS either due to injury, choice, or due to metrics not being recorded.

He had a recorded height of 6016 that season, recorded as XYYZ where X is feet, YY is inches, and Z is eighths of an inch. That correlates to 6 feet, 1 and 6/8 of an inch or 73.75 inches, or 187.325 centimeters. This correlates to a 8.62 score out of 10.0.

He recorded a weight of 213 in pounds, which is approximately 96 kilograms. This correlates to a 9.02 score out of 10.0.

Based on his weight, he has a projected 40 yard dash time of 4.61. This is calculated by taking 0.00554 multiplied by his weight and then adding 3.433.

At the Combine, he recorded a 40 yard dash of 4.52 seconds. This was a difference of -0.09 seconds from his projected time. This forty time correlates to a 7.81 score out of 10.0.

Using Bill Barnwell’s calculation, this Combine 40 time gave him a Speed Score of 102.06.

The time traveled between the 20 and 40 yard lines is known as the Flying Twenty. As the distance is also known, we can calculate the player’s speed over that distance. The time he traveled the last twenty yards at the Combine was 1.86 seconds. Over 20 yards, we can calculate his speed in yards per second to 10.75. Taking into account the distance in feet (60 feet), we can calculate his speed in feet per second to 32.26. Breaking it down further, we can calculate his speed in inches per second to 387.1. Knowing the feet per second of 32.26, we can calculate the approximate miles per hour by multiplying that value by 0.681818 to give us a calculated MPH of 22.0 in the last 20 yards of his run.

At the Combine, he recorded a 20 yard split of 2.66 seconds. This correlates to a 6.02 score out of 10.0.

We can calculate the speed traveled over the second ten yards of the 40 yard dash easily, as the distance and time are both known. The time he traveled the second ten yards at the Combine was 1.06 seconds. Over 10 yards, we can calculate his speed in yards per second to 9.43. Taking into account the distance in feet (30 feet), we can calculate his speed in feet per second to 28.3. Breaking it down further, we can calculate his speed in inches per second to 339.62. Knowing the feet per second of 28.3, we can calculate the approximate miles per hour by multiplying that value by 0.681818 to give us a calculated MPH of 19.3 in the second ten yards of his run.

At the Combine, he recorded a 10 yard split of 1.6 seconds. This correlates to a 5.71 score out of 10.0.

The time he traveled the first ten yards at the Combine was 1.6 seconds. Over 10 yards, we can calculate his speed in yards per second to 6.0. Taking into account the distance in feet (30 feet), we can calculate his speed in feet per second to 19.0. Breaking it down further, we can calculate his speed in inches per second to 225.0. Knowing the feet per second of 19.0, we can calculate the approximate miles per hour by multiplying that value by 0.681818 to give us a calculated MPH of 13.0 in the first ten yards of his run.

This player did not have a recorded bench press for the Combine in the RAS database.

This player did not have a recorded vertical jump for the Combine in the RAS database.

This player did not have a recorded broad jump for the Combine in the RAS database.

This player did not have a recorded 5-10-5 or 20 yard short shuttle for the Combine in the RAS database.

This player did not have a recorded 3 cone L drill for the Combine in the RAS database.

This player did not record any measurements at their pro day that we were able to find. If they recorded Combine measurements, they stood on them.

Advertisements

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.