Advertisements

Jake Hanson RAS

Jake Hanson RAS

Jake Hanson was drafted by Packers with pick 208 in round 6 in the 2020 NFL Draft out of Oregon.

He recorded a Relative Athletic Score of 3.74, out of a possible 10.0. RAS is a composite metric on a 0 to 10 scale based on the average of all of the percentile for each of the metrics the player completed either at the Combine or pro day.

He had a recorded height of 6043 that season, recorded as XYYZ where X is feet, YY is inches, and Z is eighths of an inch. That correlates to 6 feet, 4 and 3/8 of an inch or 76.375 inches, or 193.9925 centimeters. This correlates to a 8.57 score out of 10.0.

He recorded a weight of 303 in pounds, which is approximately 137 kilograms. This correlates to a 6.82 score out of 10.0.

Based on his weight, he has a projected 40 yard dash time of 5.11. This is calculated by taking 0.00554 multiplied by his weight and then adding 3.433.

At the Combine, he recorded a 40 yard dash of 5.5 seconds. This was a difference of 0.39 seconds from his projected time. This forty time correlates to a 1.5 score out of 10.0.

Using Bill Barnwell’s calculation, this Combine 40 time gave him a Speed Score of 66.22.

The time traveled between the 20 and 40 yard lines is known as the Flying Twenty. As the distance is also known, we can calculate the player’s speed over that distance. The time he traveled the last twenty yards at the Combine was 2.29 seconds. Over 20 yards, we can calculate his speed in yards per second to 8.73. Taking into account the distance in feet (60 feet), we can calculate his speed in feet per second to 26.2. Breaking it down further, we can calculate his speed in inches per second to 314.41. Knowing the feet per second of 26.2, we can calculate the approximate miles per hour by multiplying that value by 0.681818 to give us a calculated MPH of 17.9 in the last 20 yards of his run.

At the Combine, he recorded a 20 yard split of 3.21 seconds. This correlates to a 0.55 score out of 10.0.

We can calculate the speed traveled over the second ten yards of the 40 yard dash easily, as the distance and time are both known. The time he traveled the second ten yards at the Combine was 1.26 seconds. Over 10 yards, we can calculate his speed in yards per second to 7.94. Taking into account the distance in feet (30 feet), we can calculate his speed in feet per second to 23.81. Breaking it down further, we can calculate his speed in inches per second to 285.71. Knowing the feet per second of 23.81, we can calculate the approximate miles per hour by multiplying that value by 0.681818 to give us a calculated MPH of 16.2 in the second ten yards of his run.

At the Combine, he recorded a 10 yard split of 1.95 seconds. This correlates to a 0.51 score out of 10.0.

The time he traveled the first ten yards at the Combine was 1.95 seconds. Over 10 yards, we can calculate his speed in yards per second to 5.0. Taking into account the distance in feet (30 feet), we can calculate his speed in feet per second to 15.0. Breaking it down further, we can calculate his speed in inches per second to 185.0. Knowing the feet per second of 15.0, we can calculate the approximate miles per hour by multiplying that value by 0.681818 to give us a calculated MPH of 10.2 in the first ten yards of his run.

At the Combine, he recorded a bench press of 33 repetitions of 225 pounds. This correlates to a 9.34 score out of 10.0.

This player did not have a recorded vertical jump for the Combine in the RAS database.

This player did not have a recorded broad jump for the Combine in the RAS database.

This player did not have a recorded 5-10-5 or 20 yard short shuttle for the Combine in the RAS database.

This player did not have a recorded 3 cone L drill for the Combine in the RAS database.

This player did not record any measurements at their pro day that we were able to find. If they recorded Combine measurements, they stood on them.

Advertisements

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.